Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Steps to sync the application

  1. Add the MSSQL application.

    image-20240817-110625.png

    image-20240817-110659.png

  2. Click on Sync Now .

    image-20240817-110815.png

  3. Enable ZUS.

    image-20240817-110919.png

  4. Fill the configuration fields, then click on Next .

    image-20240817-111258.png

  5. The sync will fail with the error as shown in the image

    image-20240817-111531.png

  6. Go to the Settings

    image-20240817-111717.png

  7. Go to the Audit Logs and Download the CSV file.

    image-20240817-111839.png

  8. Go back to the application and click on the gear icon

    image-20240817-112021.png

  9. Enable the toggle for “Accounts & Permissions CSV File Upload” and click on Sync Now

    image-20240817-112237.png

  10. Select the “Accounts & Permissions CSV File Upload” and click on Next

    image-20240817-112332.png

  11. Upload the previously downloaded CSV file in step 7 above.

image-20240819-213220.png

  1. Do the CSV column mapping and click on Next

    image-20240817-112632.png

  2. Now the column mapping is saved, Click on Discard.

    image-20240817-112808.png

  3. Go back to the application and click the gear icon again

    image-20240817-112940.png

  4. Disable the toggle “Accounts & Permissions CSV File Upload” and click on Sync Now.

    image-20240817-113119.png

  5. Now onwards, sync will succeed.

    image-20240817-113238.png

When you have finished with all the steps above, review the information in Zilla that was synced.

Having trouble? Try our Troubleshooting articles or contact support@zillasecurity.com.

  • No labels